new garage door parts corner house imagenew garage door parts logo
new garage door parts left corner imagenew garage door parts right corner image

Garage Door Parts Home Bearings Bearing Plates Bottom Brackets Bottom Seals Brush Seals Cable Drums Cables Center Support Chain Hoists Door Butler Door Tune Up Emergency Release Exhaust Ports Fasteners Hinges Door Insulation Keyless Entry Lift Handles Lock Handles Lubricant One Piece Hardware Operator BracketsOperator Parts Parking Wedges Pest Control Pulleys / Sheaves Radio Controls Rollers Rubber Astragal Safety Reverse Shafts Sliding Hardware Solenoid Lock Spring Fittings Springs Stop Moulding Terminology Top Roller Carriers Tracks Truck/Trailer Doors Vee Belts Vinyl Strip Doors Contact Us ShippingReturn Policy Safety Site Map View Shopping Cart Add URL

Garage Door Weight Calculator

Official Color Codes for Torsion and Extension Springs

Guidelines for Connecting a Drawbar Operator to a Sectional Garage Door

Drywall Surfaces and the Mounting of Garage Door Hardware

Garage Door Torsion Spring Installation Instructions

Garage Door Extension Spring Installation Instructions

How to Replace Garage Door Rollers and Hinges.



new garage door parts bottom left corner imagenew garage door parts bottom right corner image
new garage door parts left corner image
Sliding door hardware for garages, barns, storage buildings etc.
new garage door parts bottom right corner image



Yoke-Type Nylon Bearing Hanger for solid wood frame doors up to 400lbs.
  • Vertical and horizontal adjustments.
  • Yoke-type drop straps prevent bolts from loosening.
  • Furnished with bolts for door thickness 1-1/2" to 2-1/4".
  • 2-1/16" wheel diameter
$52.10 Pair Qty.

Front strap adjustable Steel Ball-Bearing Hanger for solid wood frame doors up to 400lbs.
  • Four 2-1/16 permanently lubricated zinc-plated ball bearings per carrier.
  • Vertical and horizontal adjustments can be accessed through the front strap for fine tuning.
  • For door thickness 1-1/2" to 2-1/4".
  • Overall size 6" x 4"
  • Comes with bolts for doors through 1-3/4" thick
$59.80 Pair Qty.

Steel Ball-Bearing Hanger for solid wood frame doors up to 400lbs.
  • For door thickness 1-1/2" to 2-1/4".
  • Four 2-1/16 permanently lubricated zinc-plated ball bearings per carrier.
  • Overall size 6" x 4"
  • Comes with bolts for doors through 1-3/4" thick
$56.51 Pair Qty.

Swivel Ball-Bearing Hanger
  • Drop bolt installs through top frame of door.
  • Vertical and horizontal adjustments (wrench included).
  • Four permanently lubricated ball bearings per carrier.
$49.73 Pair Qty.

Standard Box Track for doors up to 400lbs.
  • Face or ceiling mounted.
  • Roll formed galvanized steel.
  • Mount with double box track bracket or Single box track bracket.
Qty.

Use this Face Mounted Double Box Track Bracket for bypassing sliding doors up to 2-1/4" thick.
  • Supplied with 3/8" x 2" lag screws.
  • Brackets should be spaced 24" to 30" O.C.
  • 2-1/2" x 1-7/8" x 2-1/2".
$28.97 Each Qty.

Face Mounted Single Box Track Bracket are easily installed for single run applications.
  • Supplied with 3/8" x 2" lag screws.
  • Brackets should be spaced 24" to 30" O.C.
$8.90 Each Qty.

Heavy-Duty Stay Roll for doors up to 3-3/4" thick.
  • Zinc-plated steel with hard rubber wheel.
  • Installs at base of jamb on each side of door opening.
$22.20 Each Qty.

Compact Stay Roll for doors up to 2-1/2" thick.
  • Zinc-plated steel with Lexan wheel.
  • Installs at base of jamb on each side of door opening.
  • Adjustable for doors up to 2-1/2" thick.
$20.50 Each Qty.


new garage door parts bottom left corner imagenew garage door parts bottom right corner image
        - Copyright © 2002 - Garage Door Parts, LLC - All Rights Reserved. - Passaic - New Jersey - 07055 -